[Linux-bruxelles] repost : carte SCSI
Xavier Bayet
xavier.bayet at freebel.net
Lun 20 Mai 16:52:22 CEST 2002
re-salut la liste,
j'ai un (petit) problème avec ma carte SCSI.
J'ai dû désactiver le reset au démarrage pour accélérer ce dernier
(sinon, 10 minutes pour booter).
Je voudrais quand même avoir une solution plus "propre"
quand je fais un dmesg, voici les lignes correspondantes au SCSI :
SCSI subsystem driver Revision: 1.00
Configuring Adaptec (SCSI-ID 0) at IO:330, IRQ 9, DMA priority 5
scsi0 : Adaptec 1542
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
Vendor: PLEXTOR Model: CD-ROM PX-20TS Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
Vendor: YAMAHA Model: CDR400t Rev: 1.0q
Type: CD-ROM ANSI SCSI revision: 02
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 4, lun 0
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
sr0: scsi-1 drive
Uniform CD-ROM driver Revision: 3.12
MBOF HACC SCRD <7>Potential to restart 0 stalled commands...
sr1: scsi3-mmc drive: 0x/0x caddy
Serait-ce un problème hardware, un problème dans le bios de la carte ?
Xav.
Plus d'informations sur la liste de diffusion Linux-bruxelles