[Linux-bruxelles] ssh et Sagem Communication de BalgacomTV

[Aldo]

Yo Didier:

On Mon, Oct 05, 2009 at 01:53:42PM +0200, Didier MISSON wrote:
> (je responds au dessus... vu Outlook Express qui ne met pas de "> " lors des réponses)

(C à d'autres que ça s'adresse ..... c pas moi qui te ferais des reproches,
c pas mon genre!!!)  

> Ah, ok, c'est un modem Bbox2 VDLS Belgacom ? 

Euuhhh, puisque tu le dis? j'en sais trop rien; en fait on ne voit pas ça,
on voit juste un Sagem Communication mais pas de type ou quoi;
son IP est sur 192.168.1.1

>Je pense que la bbox2 est un Sagem.
> 
> Ps : vérifie stp si le WiFi est actif et s'il est encore en CLAIR !
> C'est lamentable comme ces modems sont installés SANS protection...
> 
> http://didier.misson.net/blog/2009/09/25/bbox-wifi-linacceptable-incompetence-de-belgacom/

Ouais, possible pour le wifi, mais pour l'ssh par l'extérieur hm, c plutôt
bien bien fermé.

Ceci dit j'ai normalement trouvé un howto, mais s'il en existe plusieurs
version de cte bac ça va pas pouvoir m'aider bcp;
en plus c truffé de boutons JavaScript, pas digestes par Lynx :-)

Enfin je réfléchis !

Aldo.

(pj pour que tu y jetes un coup d'oeil au cas où tu as un souvenir de
l'appareil...)

-------------- section suivante --------------
http://www.portforward.com/english/routers/port_forwarding/Sagem/LiveboxTP-Fast3202/default.htm
Open a web browser like internet explorer or Netscape. Enter the ip address of 
your router in the address bar of your browser. In the picture above the 
address bar has http://www.google.com in it. Just replace all of that with the 
ip address of your router. By default the ip address should be set to 192.168.1.1.

You should see a box prompting you for your username and password. Enter your 
username and password now. By default both the username and password are admin. 
Click the Ok button to log in to your router.

Click the LAN servers button near the top of the page.
Click the Add button near the bottom of the page.
Enter the name of the program into the Server name box. It doesn't really 
matter what you put into this box, but something that will remind you why these 
ports are being forwarded would be a good idea. Select Access activated from 
the Yes drop down box. Use the Protocol drop down box to select the protocol 
type of the ports you are forwarding.  Enter the port to forward into the Port 
from and the To boxes. Enter the ip address to forward these ports to into the 
Local IP address box. If you are forwarding ports so you can run a program on 
your computer, you should enter your computer's ip address into that box. When 
you are finished, click the Apply button.

When you're finished, click Save near the top of the screen to save your changes.

And that's it! You're done!



Click the Save / Erase / Reboot button near the top of the page.
-- 
Jan
linux at jrlonline.be

Debian Lenny moet er nog meer (zand) zijn ?