[Linux-bruxelles] photoviewer reconnu mais...

Aldo info at brlspeak.net
Jeu 28 Fév 16:54:28 CET 2008


Hello,

Suite péripécies G-Line porte-clef photo-viewer:

ayanat reporté mon appareil (photoviewer porteclef) chez Mediamachin... ils 
m'ont dit que "je faisais qq chose de travers", cad qu'il faut appuyer 
apparement sur un bouton pour choisir entre Load battery ou Update:
pour effectuer la connection USB, il faut être en mode Update.

Bien! Ubuntu Feisty semble trouver le device, cf. typescript plus bas, mais
pas de filesystem reconnu sur la dite partition trouvée; 
donc rien de mounté et lsusb ne donne pas d'identifiant...
Es-ce  gphotofs  dont j'ai besoin ?

Qq'un ayant expérience avec les appareils à chip, genre pods/lecteurs mpx,
etc, toute info/tuyau bienvenu.

(Biensûr j'ai un pote qui a un pc XP sur lequel on sait faire via leur soft
du snapshot+transfert de photos vers le device; mais si on peut le faire 
à partir d'Ubuntu sans passer par l'ami..... ça me ferait plaisir)

Typescript de mes tests:
mmm at ubuntu:~$ lsusb
Bus 005 Device 003: ID 04b4:6830 Cypress Semiconductor Corp. USB-2.0 IDE Adapter
Bus 005 Device 001: ID 0000:0000  
Bus 003 Device 002: ID 1403:0001  
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 003: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
(je ne vois pas d'appareil, ou d'identifiant, juste le scanner et l'usb
disque externe pour les mp3, à moins que je me trompes...)

Parcontre:
mmm at ubuntu:~$ dmesg |tail
[  506.849797] sdc: Write Protect is off
[  506.849800] sdc: Mode Sense: 0b 00 00 08
[  506.849803] sdc: assuming drive cache: write through
[  506.858782] SCSI device sdc: 4096 512-byte hdwr sectors (2 MB)
[  506.861777] sdc: Write Protect is off
[  506.861780] sdc: Mode Sense: 0b 00 00 08
[  506.861783] sdc: assuming drive cache: write through
[  506.861785]  sdc: unknown partition table
[  506.890750] sd 3:0:0:0: Attached scsi removable disk sdc
[  506.890792] sd 3:0:0:0: Attached scsi generic sg3 type 0
(là le sg3 ou sdc ça doit bien être le photoviewer, mais ça ne le mounte
pas)

Si je retire le photoviewer:
mmm at ubuntu:~$ lsusb
Bus 005 Device 003: ID 04b4:6830 Cypress Semiconductor Corp. USB-2.0 IDE Adapter
Bus 005 Device 001: ID 0000:0000  
Bus 003 Device 001: ID 0000:0000  
Bus 002 Device 003: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20
Bus 002 Device 001: ID 0000:0000  
Bus 001 Device 001: ID 0000:0000  
Bus 004 Device 001: ID 0000:0000  
Alors que demsg lui montre bien que ça a été déconnecté, cf. bas:
mmm at ubuntu:~$ dmesg
[    0.000000] Linux version 2.6.20-16-generic (root at terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Tue Feb 12 05:41:34 UTC 2008 (Ubuntu 2.6.20-16.35-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000007f6f0000 end: 000000007f7f0000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000007f7f0000 size: 0000000000003000 end: 000000007f7f3000 type: 4
[    0.000000] copy_e820_map() start: 000000007f7f3000 size: 000000000000d000 end: 000000007f800000 type: 3
[    0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f7f0000 (usable)
[    0.000000]  BIOS-e820: 000000007f7f0000 - 000000007f7f3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f7f3000 - 000000007f800000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] 1143MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f3c40
[    0.000000] Entering add_active_range(0, 0, 522224) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   522224
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   522224
[    0.000000] On node 0 totalpages: 522224
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2287 pages used for memmap
[    0.000000]   HighMem zone: 290561 pages, LIFO batch:31
[    0.000000] DMI 2.4 present.
[    0.000000] ACPI: RSDP (v000 IntelR                                ) @ 0x000f75c0
[    0.000000] ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f7f3040
[    0.000000] ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f7f30c0
[    0.000000] ACPI: MCFG (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f7f7e00
[    0.000000] ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7f7f7d00
[    0.000000] ACPI: SSDT (v001  PmRef  Cpu0Ist 0x00003000 INTL 0x20040311) @ 0x7f7f7e80
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20040311) @ 0x7f7f8310
[    0.000000] ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:60800000)
[    0.000000] Detected 2394.087 MHz processor.
[   30.754553] Built 1 zonelists.  Total pages: 518145
[   30.754556] Kernel command line: root=UUID=19679170-38ac-4bb5-81f8-0b2c3513df3f ro quiet splash ù locale=nl_NL
[   30.754679] mapped APIC to ffffd000 (fee00000)
[   30.754680] mapped IOAPIC to ffffc000 (fec00000)
[   30.754682] Enabling fast FPU save and restore... done.
[   30.754684] Enabling unmasked SIMD FPU exception support... done.
[   30.754691] Initializing CPU#0
[   30.754738] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   30.755824] Console: colour VGA+ 80x25
[   30.756005] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   30.756207] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   30.808501] Memory: 2059956k/2088896k available (1993k kernel code, 27660k reserved, 900k data, 328k init, 1171392k highmem)
[   30.808508] virtual kernel memory layout:
[   30.808509]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   30.808510]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   30.808511]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   30.808511]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   30.808512]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   30.808513]       .data : 0xc02f24c9 - 0xc03d36d4   ( 900 kB)
[   30.808514]       .text : 0xc0100000 - 0xc02f24c9   (1993 kB)
[   30.808516] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   30.886523] Calibrating delay using timer specific routine.. 4791.71 BogoMIPS (lpj=9583423)
[   30.886554] Security Framework v1.0.0 initialized
[   30.886560] SELinux:  Disabled at boot.
[   30.886571] Mount-cache hash table entries: 512
[   30.886679] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   30.886686] monitor/mwait feature present.
[   30.886687] using mwait in idle threads.
[   30.886690] CPU: L1 I cache: 32K, L1 D cache: 32K
[   30.886692] CPU: L2 cache: 4096K
[   30.886694] CPU: Physical Processor ID: 0
[   30.886695] CPU: Processor Core ID: 0
[   30.886696] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   30.886703] Compat vDSO mapped to ffffe000.
[   30.886706] Remapping vsyscall page to ffffe000
[   30.886716] Checking 'hlt' instruction... OK.
[   30.902594] SMP alternatives: switching to UP code
[   30.902918] Early unpacking initramfs... done
[   31.124946] ACPI: Core revision 20060707
[   31.130893] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[   31.140009] CPU0: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
[   31.140024] SMP alternatives: switching to SMP code
[   31.140087] Booting processor 1/1 eip 3000
[   31.150644] Initializing CPU#1
[   31.229950] Calibrating delay using timer specific routine.. 4788.36 BogoMIPS (lpj=9576720)
[   31.229955] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
[   31.229958] monitor/mwait feature present.
[   31.229960] CPU: L1 I cache: 32K, L1 D cache: 32K
[   31.229961] CPU: L2 cache: 4096K
[   31.229963] CPU: Physical Processor ID: 0
[   31.229964] CPU: Processor Core ID: 1
[   31.229965] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001
[   31.230531] CPU1: Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
[   31.230545] Total of 2 processors activated (9580.07 BogoMIPS).
[   31.230689] ENABLING IO-APIC IRQs
[   31.230852] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   31.377712] checking TSC synchronization across 2 CPUs: passed.
[    0.003994] Brought up 2 CPUs
[    0.315036] migration_cost=100
[    0.315241] Booting paravirtualized kernel on bare hardware
[    0.315302] Time: 13:42:33  Date: 01/28/108
[    0.315322] NET: Registered protocol family 16
[    0.315386] EISA bus registered
[    0.315389] ACPI: bus type pci registered
[    0.341976] PCI: PCI BIOS revision 3.00 entry at 0xfa110, last bus=1
[    0.341978] PCI: Using configuration type 1
[    0.341979] Setting up standard PCI resources
[    0.362406] ACPI: Interpreter enabled
[    0.362408] ACPI: Using IOAPIC for interrupt routing
[    0.362857] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.362862] PCI: Probing PCI hardware (bus 00)
[    0.363063] Boot video device is 0000:00:02.0
[    0.363347] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.363350] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.363690] PCI: Transparent bridge - 0000:00:1e.0
[    0.363710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.371408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.374278] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.374459] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.374642] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[    0.374824] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.375004] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[    0.375183] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.375369] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.375561] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.375749] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.375755] pnp: PnP ACPI init
[    0.378506] pnp: PnP ACPI: found 15 devices
[    0.378509] PnPBIOS: Disabled by ACPI PNP
[    0.378540] PCI: Using ACPI for IRQ routing
[    0.378542] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.387591] NET: Registered protocol family 8
[    0.387593] NET: Registered protocol family 20
[    0.387886] pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved
[    0.388075] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[    0.388078] PCI: Bridge: 0000:00:1e.0
[    0.388080]   IO window: d000-dfff
[    0.388084]   MEM window: fde00000-fdefffff
[    0.388087]   PREFETCH window: fdd00000-fddfffff
[    0.388098] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.388117] NET: Registered protocol family 2
[    0.427532] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.427622] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.427973] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.428148] TCP: Hash tables configured (established 131072 bind 65536)
[    0.428150] TCP reno registered
[    0.443639] checking if image is initramfs... it is
[    0.880457] Freeing initrd memory: 6787k freed
[    0.880959] audit: initializing netlink socket (disabled)
[    0.880973] audit(1204206153.584:1): initialized
[    0.881047] highmem bounce pool size: 64 pages
[    0.881110] VFS: Disk quotas dquot_6.5.1
[    0.881124] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.881166] io scheduler noop registered
[    0.881167] io scheduler anticipatory registered
[    0.881169] io scheduler deadline registered
[    0.881176] io scheduler cfq registered (default)
[    0.881386] isapnp: Scanning for PnP cards...
[    1.233705] isapnp: No Plug & Play device found
[    1.248642] Real Time Clock Driver v1.12ac
[    1.248685] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    1.248786] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.249200] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.249366] mice: PS/2 mouse device common for all mice
[    1.249758] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[    1.249868] input: Macintosh mouse button emulation as /class/input/input0
[    1.249894] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.249896] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    1.250060] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.252705] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.252708] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.252776] EISA: Probing bus 0 at eisa.0
[    1.252803] EISA: Detected 0 cards.
[    1.282816] TCP cubic registered
[    1.282824] NET: Registered protocol family 1
[    1.282839] Starting balanced_irq
[    1.282844] Using IPI No-Shortcut mode
[    1.282893] input: AT Translated Set 2 keyboard as /class/input/input1
[    1.282948] ACPI: (supports S0 S3 S4 S5)
[    1.282984]   Magic number: 12:142:737
[    1.283141] Freeing unused kernel memory: 328k freed
[    1.285847] Time: tsc clocksource has been installed.
[    2.426787] Capability LSM initialized
[    2.450411] ACPI: Fan [FAN] (on)
[    2.453069] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
[    2.453101] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[    2.453105] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
[    2.453890] ACPI: Thermal Zone [THRM] (40 C)
[    2.695119] usbcore: registered new interface driver usbfs
[    2.695136] usbcore: registered new interface driver hub
[    2.695151] usbcore: registered new device driver usb
[    2.706144] USB Universal Host Controller Interface driver v3.0
[    2.706190] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 16
[    2.706200] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    2.706203] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.706285] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[    2.706309] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000fe00
[    2.706383] usb usb1: configuration #1 chosen from 1 choice
[    2.706402] hub 1-0:1.0: USB hub found
[    2.706406] hub 1-0:1.0: 2 ports detected
[    2.750216] Floppy drive(s): fd0 is 1.44M
[    2.753362] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    2.773465] FDC 0 is a post-1991 82077
[    2.810568] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
[    2.810576] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    2.810579] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.810653] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[    2.810677] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000fd00
[    2.810945] usb usb2: configuration #1 chosen from 1 choice
[    2.811038] hub 2-0:1.0: USB hub found
[    2.811044] hub 2-0:1.0: 2 ports detected
[    2.915107] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    2.915113] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    2.915116] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.915130] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[    2.915151] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[    2.915206] usb usb3: configuration #1 chosen from 1 choice
[    2.915226] hub 3-0:1.0: USB hub found
[    2.915229] hub 3-0:1.0: 2 ports detected
[    3.019198] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 19
[    3.019205] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.019209] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.019230] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[    3.019255] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000fb00
[    3.019323] usb usb4: configuration #1 chosen from 1 choice
[    3.019342] hub 4-0:1.0: USB hub found
[    3.019345] hub 4-0:1.0: 2 ports detected
[    3.123738] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 16
[    3.123748] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    3.123751] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.123772] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[    3.123798] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    3.123803] ehci_hcd 0000:00:1d.7: irq 16, io mem 0xfdfff000
[    3.127672] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    3.127717] usb usb5: configuration #1 chosen from 1 choice
[    3.127738] hub 5-0:1.0: USB hub found
[    3.127742] hub 5-0:1.0: 8 ports detected
[    3.151597] usb 2-2: new full speed USB device using uhci_hcd and address 2
[    3.232430] 8139cp 0000:01:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[    3.232434] 8139cp 0000:01:03.0: Try the "8139too" driver instead.
[    3.232492] r8169 Gigabit Ethernet driver 2.2LK loaded
[    3.232512] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 20 (level, low) -> IRQ 20
[    3.232669] eth0: RTL8169sc/8110sc at 0xf884a000, 00:50:8d:cb:b6:53, IRQ 20
[    3.237926] 8139too Fast Ethernet driver 0.9.28
[    3.237952] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[    3.238261] eth1: RealTek RTL8139 at 0xf8856000, 00:0a:cd:0f:ff:27, IRQ 20
[    3.238263] eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
[    3.242770] SCSI subsystem initialized
[    3.246177] libata version 2.20 loaded.
[    3.247083] ata_piix 0000:00:1f.2: version 2.10ac1
[    3.247087] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    3.247104] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17
[    3.247115] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    3.247139] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f800 irq 14
[    3.247159] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f808 irq 15
[    3.247178] scsi0 : ata_piix
[    3.462544] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[    3.462550] ata1.00: ATA-7: ST3160811AS, 3.AAE, max UDMA/133
[    3.462553] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    3.529059] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[    3.529063] ata1.00: configured for UDMA/133
[    3.529069] scsi1 : ata_piix
[    3.771574] usb 5-5: new high speed USB device using ehci_hcd and address 3
[    3.848503] ata2.00: ATAPI, max UDMA/66
[    3.907321] usb 5-5: configuration #1 chosen from 1 choice
[    4.013435] ata2.00: configured for UDMA/66
[    4.013522] scsi 0:0:0:0: Direct-Access     ATA      ST3160811AS      3.AA PQ: 0 ANSI: 5
[    4.020452] scsi 1:0:0:0: CD-ROM            PIONEER  DVD-RW  DVR-111D 1.23 PQ: 0 ANSI: 5
[    4.026148] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[    4.026156] sda: Write Protect is off
[    4.026157] sda: Mode Sense: 00 3a 00 00
[    4.026167] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.026202] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[    4.026209] sda: Write Protect is off
[    4.026210] sda: Mode Sense: 00 3a 00 00
[    4.026219] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.026221]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[    4.126882] sd 0:0:0:0: Attached scsi disk sda
[    4.129163] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.129178] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.145685] usb 2-2: new full speed USB device using uhci_hcd and address 3
[    4.157211] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    4.157215] Uniform CD-ROM driver Revision: 3.20
[    4.157359] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.319214] usb 2-2: configuration #1 chosen from 1 choice
[    4.322319] usbcore: registered new interface driver libusual
[    4.325087] Initializing USB Mass Storage driver...
[    4.325213] scsi2 : SCSI emulation for USB Mass Storage devices
[    4.327236] usbcore: registered new interface driver usb-storage
[    4.327238] USB Mass Storage support registered.
[    4.327283] usb-storage: device found at 3
[    4.327284] usb-storage: waiting for device to settle before scanning
[    4.503460] Attempting manual resume
[    4.503462] swsusp: Resume From Partition 8:1
[    4.503463] PM: Checking swsusp image.
[    4.517096] PM: Resume from disk failed.
[    4.547118] kjournald starting.  Commit interval 5 seconds
[    4.547124] EXT3-fs: mounted filesystem with ordered data mode.
[    9.319132] usb-storage: device scan complete
[    9.331986] scsi 2:0:0:0: Direct-Access     SAMSUNG  HM120JC          0000 PQ: 0 ANSI: 0
[    9.333089] SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
[    9.333960] sdb: Write Protect is off
[    9.333962] sdb: Mode Sense: 27 00 00 00
[    9.333964] sdb: assuming drive cache: write through
[    9.334866] SCSI device sdb: 234441648 512-byte hdwr sectors (120034 MB)
[    9.335833] sdb: Write Protect is off
[    9.335835] sdb: Mode Sense: 27 00 00 00
[    9.335836] sdb: assuming drive cache: write through
[    9.335839]  sdb: sdb1
[    9.791733] sd 2:0:0:0: Attached scsi disk sdb
[    9.791763] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   11.531335] r8169: eth1: link up
[   11.912600] NET: Registered protocol family 10
[   11.912674] lo: Disabled Privacy Extensions
[   12.264280] Linux agpgart interface v0.102 (c) Dave Jones
[   12.323283] agpgart: Detected an Intel 945G Chipset.
[   12.324057] agpgart: Detected 7932K stolen memory.
[   12.336060] agpgart: AGP aperture is 256M @ 0xd0000000
[   12.375156] iTCO_vendor_support: vendor-support=0
[   12.440935] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   12.462166] gameport: EMU10K1 is pci0000:01:02.1/gameport0, io 0xde00, speed 994kHz
[   12.471129] parport: PnPBIOS parport detected.
[   12.471170] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   12.764428] ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 19 (level, low) -> IRQ 17
[   13.038536] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[   13.041234] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[   13.041245] input: PC Speaker as /class/input/input3
[   13.041260] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.073919] intel_rng: FWH not detected
[   13.209026] fuse init (API version 7.8)
[   13.218488] lp0: using parport0 (interrupt-driven).
[   13.274554] Adding 1951856k swap on /dev/disk/by-uuid/72046a69-6113-4d18-acc0-5828fb24b96d.  Priority:-1 extents:1 across:1951856k
[   13.371082] EXT3 FS on sda2, internal journal
[   22.766416] eth1: no IPv6 routers present
[   50.365398] kjournald starting.  Commit interval 5 seconds
[   50.365552] EXT3 FS on sda5, internal journal
[   50.365557] EXT3-fs: mounted filesystem with ordered data mode.
[   51.766551] NET: Registered protocol family 17
[   54.558471] ibm_acpi: ec object not found
[   54.649816] Using specific hotkey driver
[   54.772960] input: Power Button (FF) as /class/input/input4
[   54.772979] ACPI: Power Button (FF) [PWRF]
[   54.773003] input: Power Button (CM) as /class/input/input5
[   54.773014] ACPI: Power Button (CM) [PWRB]
[   54.812770] No dock devices found.
[   54.863098] pcc_acpi: loading...
[   57.849025] eth0: link down
[   57.849113] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   58.807528] ppdev: user-space parallel port driver
[   59.107273] [drm] Initialized drm 1.1.0 20060810
[   59.135023] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19
[   59.135243] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   60.172750] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   60.172753] apm: disabled - APM is not SMP safe.
[   60.890570] Bluetooth: Core ver 2.11
[   60.890617] NET: Registered protocol family 31
[   60.890618] Bluetooth: HCI device and connection manager initialized
[   60.890620] Bluetooth: HCI socket layer initialized
[   60.914000] Bluetooth: L2CAP ver 2.8
[   60.914003] Bluetooth: L2CAP socket layer initialized
[   61.057110] Bluetooth: RFCOMM socket layer initialized
[   61.057117] Bluetooth: RFCOMM TTY layer initialized
[   61.057119] Bluetooth: RFCOMM ver 1.8
[   68.299232] EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
[  501.660661] usb 3-2: new full speed USB device using uhci_hcd and address 2
[  501.842341] usb 3-2: configuration #1 chosen from 1 choice
[  501.845331] scsi3 : SCSI emulation for USB Mass Storage devices
[  501.845431] usb-storage: device found at 2
[  501.845432] usb-storage: waiting for device to settle before scanning
[  506.838830] usb-storage: device scan complete
[  506.841832] scsi 3:0:0:0: Direct-Access     SITRONIX MULTIMEDIA       0.09 PQ: 0 ANSI: 0 CCS
[  506.846803] SCSI device sdc: 4096 512-byte hdwr sectors (2 MB)
[  506.849797] sdc: Write Protect is off
[  506.849800] sdc: Mode Sense: 0b 00 00 08
[  506.849803] sdc: assuming drive cache: write through
[  506.858782] SCSI device sdc: 4096 512-byte hdwr sectors (2 MB)
[  506.861777] sdc: Write Protect is off
[  506.861780] sdc: Mode Sense: 0b 00 00 08
[  506.861783] sdc: assuming drive cache: write through
[  506.861785]  sdc: unknown partition table
[  506.890750] sd 3:0:0:0: Attached scsi removable disk sdc
[  506.890792] sd 3:0:0:0: Attached scsi generic sg3 type 0
[  641.828689] usb 3-2: USB disconnect, address 2

Aldo. 




Plus d'informations sur la liste de diffusion Linux-bruxelles