[Linux-bruxelles] pfffffff ... HD ...

dmlinux at belcenter.com dmlinux at belcenter.com
Lun 25 Sep 06:47:00 CEST 2006


Quoting dmlinux at belcenter.com:

> Ubuntu 6.06
> MB Asus avec nForce 3
> disque dur SATA
>
> etencore des problèmes...
> Ok, c'est probablement un mauvais contactavec un des connecteursdu
> câble SATA.

> ubuntu at ubuntu:~$ sudo fdisk -l /dev/sda
>
> Disque/dev/sda: 160.0 Go, 160041885696 octets
> 255 têtes, 63secteurs/piste, 19457 cylindres
> Unités = cylindres de 16065 * 512= 8225280 octets
>
> Périphérique Amorce    Début         Fin     Blocs    Id Système
> /dev/sda1   *           1        5163   41471766    7 HPFS/NTFS
> /dev/sda2            5164       5278      923737+  82  Linux swap/
> Solaris
> /dev/sda3           5279        6322     8385930   83  Linux
> /dev/sda4           6323       12849    52428127+   5 Extended
> /dev/sda5           6323        7627    10482381    b  W95FAT32
> /dev/sda6           7628        8933    10490413+  83  Linux
> /dev/sda7           8934       12849    31455238+  83 Linux

> ubuntu at ubuntu:~$ sudo fsck.ext3 /dev/sda7
> e2fsck 1.39(29-May-2006)
> Les descripteurs de groupe semblent en mauvaisétat... tente
> d'archiver les blocs...
> la table d'i-noeuds pour legroupe 127 n'est pas dans le
groupe.(bloc
> 32773)
> AVERTISSEMENT :PERTE SÉVÈRE DE DONNÉES POSSIBLE.
> Relocaliser?annulé !
>
> ubuntu at ubuntu:~$

C'est bien le câble et pas le disque durlui-même (enfin, pas les
plateaux ni les têtes... le connecteurça...)

Voici ce que me donne smartctl:

ubuntu at ubuntu:~$ sudo smartctl -d ata -a/dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C)2002-6 Bruce
Allen
Home page ishttp://smartmontools.sourceforge.net/

=== START OF INFORMATIONSECTION ===
Model Family:     Western Digital Caviar SE (SerialATA) family
Device Model:     WDC WD1600JD-40GBB2
SerialNumber:    WD-WMAES4580816
Firmware Version: 09.05M09
UserCapacity:    160.041.885.696 bytes
Device is:        In smartctldatabase [for details use: -P show]
ATA Version is:   6
ATAStandard is:  Exact ATA specification draft version notindicated
Local Time is:    Mon Sep 25 04:37:51 2006 UTC
SMARTsupport is: Available - device has SMART capability.
SMART supportis: Enabled

=== START OF READ SMART DATA SECTION ===
SMARToverall-health self-assessment test result: PASSED

GeneralSMART Values:
Offline data collection status:  (0x82) Offline datacollection
activity
                                        wascompleted without error.
                                       Auto Offline Data Collection:
Enabled.
Self-test executionstatus:      (   0) The previous self-test
routinecompleted
                                        without error orno self-test
has ever
                                        beenrun.
Total time to complete Offline
datacollection:                 (5061) seconds.
Offline datacollection
capabilities:                    (0x79) SMART executeOffline
immediate.
                                        No AutoOffline data
collectionsupport.
                                        Suspend Offlinecollection
upon new
                                       command.
                                        Offline surfacescan
supported.
                                        Self-testsupported.
                                        ConveyanceSelf-test
supported.
                                       Selective Self-test supported.
SMART capabilities:           (0x0003) Saves SMART data
beforeentering
                                        power-savingmode.
                                        Supports SMART autosave
timer.
Error logging capability:        (0x01) Error loggingsupported.
                                        No GeneralPurpose Logging
support.
Short self-test routine
recommendedpolling time:        (   2) minutes.
Extended self-testroutine
recommended polling time:        (  67)minutes.
Conveyance self-test routine
recommended pollingtime:        (   5) minutes.

SMART Attributes Data Structurerevision number: 16
Vendor Specific SMART Attributes withThresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORSTTHRESH TYPE     
UPDATED  WHEN_FAILED RAW_VALUE
  1Raw_Read_Error_Rate     0x000b   200   200   051   
Pre-fail Always       -       0
  3 Spin_Up_Time            0x0007   146  144   021    Pre-fail 
Always       -       3233
  4Start_Stop_Count        0x0032   100   100   040   
Old_age  Always       -       909
  5 Reallocated_Sector_Ct   0x0033  200   200   140    Pre-fail 
Always       -       0
  7Seek_Error_Rate         0x000b   200   200   051   
Pre-fail Always       -       0
  9 Power_On_Hours          0x0032   095  095   000    Old_age  
Always       -       3877
 10Spin_Retry_Count        0x0013   100   100   051   
Pre-fail Always       -       0
 11 Calibration_Retry_Count 0x0013   100  100   051    Pre-fail 
Always       -       0
 12Power_Cycle_Count       0x0032   100   100   000   
Old_age  Always       -       816
194 Temperature_Celsius     0x0022  110   253   000    Old_age  
Always       -       40
196Reallocated_Event_Count 0x0032   200   200   000   
Old_age  Always       -       0
197 Current_Pending_Sector  0x0012   200  200   000    Old_age  
Always       -       0
198Offline_Uncorrectable   0x0012   200   200   000   
Old_age  Always       -       0
199 UDMA_CRC_Error_Count    0x000a   200  253   000    Old_age  
Always       -       9042
200Multi_Zone_Error_Rate   0x0009   200   155   051   
Pre-fail Offline      -       0

SMART Error Log Version: 1
No ErrorsLogged

SMART Self-test log structure revision number 1
Noself-tests have been logged.  [To run self-tests, use: smartctl-t]

SMART Selective self-test log data structure revisionnumber 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
   1        0        0  Not_testing
    2        0        0 Not_testing
    3        0        0  Not_testing
    4       0        0  Not_testing
    5        0        0 Not_testing
Selective self-test flags (0x0):
  After scanningselected spans, do NOT read-scan remainder of disk.
If Selectiveself-test is pending on power-up, resume after 0
minutedelay.

ubuntu at ubuntu:~$

On peut voir des  UDMACRC Error,
mais pas des erreurs physiques sur le disque

--
Didier






Get your free mail @belcenter.com - http://www.belcenter.com


-------------- section suivante --------------
Une pièce jointe HTML a été nettoyée...
URL: </pipermail/linux-bruxelles/attachments/20060925/9f74b500/attachment-0002.html>


Plus d'informations sur la liste de diffusion Linux-bruxelles