[Linux-bruxelles] probleme firewire ieee1394

[peter_westenberg]

bonjour a tous
mon ordi a un probleme reconnaitre le firewire
ni les discs ni mon camera sont reconnu
j'utilise Cinelerra et Kino sous ubuntu dapper

j'ai suivi les conseils sur le BXLUG list: http://www.bxlug.be/articles/220
raw1394 + video1394 + dv1394 sont dans /etc/modules
pendant les derniers 6 mois tous a marche tres bien

mais d'un moment a l'autre,
(apres changer qqs exports settings dans Kino)
rien ne marche plus

une page dans le  ubuntu community m'a donne des conseils,
que j'ai tous essaye, sans aucun resultat ..
https://help.ubuntu.com/community/Firewire

je me suis demande peut etre le probleme est chez le hardware ...
moi je connais pas tres bien ce terrain

qqn pourrait m'aider?
merci
peter


output dmesg:

peter at peter-desktop:~$ dmesg
[17179569.184000] Linux version 2.6.15-27-386 (buildd at terranova) (gcc 
version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Sat Sep 16 01:51:59 
UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[17179569.184000]  BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI 
data)
[17179569.184000]  BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[17179569.184000]  BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[17179569.184000] 127MB HIGHMEM available.
[17179569.184000] 896MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 262064
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 225280 pages, LIFO batch:31
[17179569.184000]   HighMem zone: 32688 pages, LIFO batch:7
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 ACPIAM 
  ) @ 0x000f9860
[17179569.184000] ACPI: RSDT (v001 A M I  OEMRSDT  0x07000504 MSFT 
0x00000097) @ 0x3ffb0000
[17179569.184000] ACPI: FADT (v002 A M I  OEMFACP  0x07000504 MSFT 
0x00000097) @ 0x3ffb0200
[17179569.184000] ACPI: MADT (v001 A M I  OEMAPIC  0x07000504 MSFT 
0x00000097) @ 0x3ffb0390
[17179569.184000] ACPI: OEMB (v001 A M I  OEMBIOS  0x07000504 MSFT 
0x00000097) @ 0x3ffc0040
[17179569.184000] ACPI: DSDT (v001  75V8p 75V8p001 0x00000001 INTL 
0x02002026) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee00000
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:4 APIC version 20
[17179569.184000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[17179569.184000] Processor #1 15:4 APIC version 20
[17179569.184000] WARNING: NR_CPUS limit of 1 reached.  Processor ignored.
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, 
GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 50000000 (gap: 
40000000:bffc0000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda1 ro quiet splash
[17179569.184000] mapped APIC to ffffd000 (fee00000)
[17179569.184000] mapped IOAPIC to ffffc000 (fec00000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[17179569.184000] Detected 2923.946 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179570.308000] Dentry cache hash table entries: 131072 (order: 7, 
524288 bytes)
[17179570.308000] Inode-cache hash table entries: 65536 (order: 6, 
262144 bytes)[17179570.332000] Memory: 1028564k/1048256k available 
(1976k kernel code, 18932k reserved, 606k data, 288k init, 130752k highmem)
[17179570.332000] Checking if this processor honours the WP bit even in 
supervisor mode... Ok.
[17179570.412000] Calibrating delay using timer specific routine.. 
5855.24 BogoMIPS (lpj=11710480)
[17179570.412000] Security Framework v1.0.0 initialized
[17179570.412000] SELinux:  Disabled at boot.
[17179570.412000] Mount-cache hash table entries: 512
[17179570.412000] CPU: After generic identify, caps: bfebfbff 20000000 
00000000 00000000 0000641d 00000000 00000000
[17179570.412000] CPU: After vendor identify, caps: bfebfbff 20000000 
00000000 00000000 0000641d 00000000 00000000
[17179570.412000] monitor/mwait feature present.
[17179570.412000] using mwait in idle threads.
[17179570.412000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[17179570.412000] CPU: L2 cache: 1024K
[17179570.412000] CPU: After all inits, caps: bfebfbff 20000000 00000000 
00000080 0000641d 00000000 00000000
[17179570.412000] mtrr: v2.0 (20020519)
[17179570.412000] CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
[17179570.412000] Enabling fast FPU save and restore... done.
[17179570.412000] Enabling unmasked SIMD FPU exception support... done.
[17179570.412000] Checking 'hlt' instruction... OK.
[17179570.428000] checking if image is initramfs... it is
[17179570.948000] Freeing initrd memory: 6616k freed
[17179570.956000] ACPI: Looking for DSDT ... not found!
[17179570.956000] ENABLING IO-APIC IRQs
[17179570.956000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[17179571.104000] NET: Registered protocol family 16
[17179571.104000] EISA bus registered
[17179571.104000] ACPI: bus type pci registered
[17179571.104000] PCI: Using configuration type 1
[17179571.104000] ACPI: Subsystem revision 20051216
[17179571.108000] ACPI: Interpreter enabled
[17179571.108000] ACPI: Using IOAPIC for interrupt routing
[17179571.108000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.108000] PCI: Probing PCI hardware (bus 00)
[17179571.112000] PCI: device 0000:00:0a.0 has unknown header type 08, 
ignoring.[17179571.112000] Boot video device is 0000:01:00.0
[17179571.112000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.128000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 
14 15)
[17179571.128000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 
14 15)
[17179571.128000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 
14 15)
[17179571.128000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 14 
15) *0, disabled.
[17179571.128000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 
15) *0, disabled.
[17179571.128000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 
15) *0, disabled.
[17179571.128000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 
15) *0, disabled.
[17179571.128000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 
15) *0, disabled.
[17179571.128000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.128000] pnp: PnP ACPI init
[17179571.132000] pnp: PnP ACPI: found 12 devices
[17179571.132000] PnPBIOS: Disabled by ACPI PNP
[17179571.132000] PCI: Using ACPI for IRQ routing
[17179571.132000] PCI: If a device doesn't work, try "pci=routeirq".  If 
it helps, post a report
[17179571.136000] PCI: Bridge: 0000:00:01.0
[17179571.136000]   IO window: b000-bfff
[17179571.136000]   MEM window: ffd00000-ffdfffff
[17179571.136000]   PREFETCH window: d7f00000-f7efffff
[17179571.136000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[17179571.136000] audit: initializing netlink socket (disabled)
[17179571.136000] audit(1161152341.136:1): initialized
[17179571.136000] highmem bounce pool size: 64 pages
[17179571.136000] VFS: Disk quotas dquot_6.5.1
[17179571.136000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.136000] Initializing Cryptographic API
[17179571.136000] io scheduler noop registered
[17179571.136000] io scheduler anticipatory registered
[17179571.136000] io scheduler deadline registered
[17179571.136000] io scheduler cfq registered
[17179571.136000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[17179571.136000] isapnp: Scanning for PnP cards...
[17179571.488000] isapnp: No Plug & Play device found
[17179571.504000] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[17179571.504000] PNP: PS/2 controller doesn't have KBD irq; using default 1
[17179571.504000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.504000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.504000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, 
IRQ sharing enabled
[17179571.504000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.508000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.508000] RAMDISK driver initialized: 16 RAM disks of 65536K 
size 1024 blocksize
[17179571.508000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.508000] ide: Assuming 33MHz system bus speed for PIO modes; 
override with idebus=xx
[17179571.508000] mice: PS/2 mouse device common for all mice
[17179571.508000] EISA: Probing bus 0 at eisa.0
[17179571.508000] EISA: Detected 0 cards.
[17179571.508000] NET: Registered protocol family 2
[17179571.548000] IP route cache hash table entries: 65536 (order: 6, 
262144 bytes)
[17179571.548000] TCP established hash table entries: 262144 (order: 8, 
1048576 bytes)
[17179571.548000] TCP bind hash table entries: 65536 (order: 6, 262144 
bytes)
[17179571.548000] TCP: Hash tables configured (established 262144 bind 
65536)
[17179571.548000] TCP reno registered
[17179571.548000] TCP bic registered
[17179571.548000] NET: Registered protocol family 1
[17179571.548000] NET: Registered protocol family 8
[17179571.548000] NET: Registered protocol family 20
[17179571.548000] Using IPI Shortcut mode
[17179571.548000] ACPI wakeup devices:
[17179571.548000] PCI0 PS2M UAR1 AC97 USB1 USB2 USB3 USB4 EHCI VUSB ILAN
[17179571.548000] ACPI: (supports S0 S1 S3 S4 S5)
[17179571.548000] Freeing unused kernel memory: 288k freed
[17179571.592000] vga16fb: initializing
[17179571.592000] vga16fb: mapped to 0xc00a0000
[17179571.692000] Console: switching to colour frame buffer device 80x25
[17179571.692000] fb0: VGA16 VGA frame buffer device
[17179572.820000] Capability LSM initialized
[17179572.852000] ACPI: Processor [CPU1] (supports 16 throttling states)
[17179573.352000] SCSI subsystem initialized
[17179573.356000] ACPI: bus type scsi registered
[17179573.356000] libata version 1.20 loaded.
[17179573.356000] sata_via 0000:00:0f.0: version 1.1
[17179573.356000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, 
low) -> IRQ 169
[17179573.356000] PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 9
[17179573.356000] sata_via 0000:00:0f.0: routed to hard irq line 9
[17179573.356000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE802 bmdma 
0xDC00 irq 169
[17179573.356000] ata2: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 
0xDC08 irq 169
[17179574.524000] scsi0 : sata_via
[17179575.692000] scsi1 : sata_via
[17179575.704000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[17179575.704000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, 
low) -> IRQ 169
[17179575.704000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[17179575.704000] VP_IDE: chipset revision 6
[17179575.704000] VP_IDE: not 100% native mode: will probe irqs later
[17179575.704000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on 
pci0000:00:0f.1
[17179575.704000]     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: 
hda:DMA, hdb:DMA
[17179575.704000]     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: 
hdc:DMA, hdd:pio
[17179575.704000] Probing IDE interface ide0...
[17179576.120000] hda: Maxtor 6L160P0, ATA DISK drive
[17179576.400000] hdb: Maxtor 6L160P0, ATA DISK drive
[17179576.460000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179576.508000] Probing IDE interface ide1...
[17179577.372000] hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
[17179577.708000] ide1 at 0x170-0x177,0x376 on irq 15
[17179577.716000] hda: max request size: 1024KiB
[17179577.728000] hda: 320173056 sectors (163928 MB) w/8192KiB Cache, 
CHS=19929/255/63, UDMA(133)
[17179577.728000] hda: cache flushes supported
[17179577.728000]  hda: hda1 hda2 < hda5 >
[17179577.752000] hdb: max request size: 1024KiB
[17179577.756000] hdb: 320173056 sectors (163928 MB) w/8192KiB Cache, 
CHS=19929/255/63, UDMA(133)
[17179577.756000] hdb: cache flushes supported
[17179577.756000]  hdb: hdb1
[17179577.764000] hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB 
Cache, UDMA(33)
[17179577.764000] Uniform CD-ROM driver Revision: 3.20
[17179578.160000] usbcore: registered new driver usbfs
[17179578.160000] usbcore: registered new driver hub
[17179578.164000] USB Universal Host Controller Interface driver v2.3
[17179578.164000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, 
low) -> IRQ 177
[17179578.164000] PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1
[17179578.164000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[17179578.164000] uhci_hcd 0000:00:10.0: new USB bus registered, 
assigned bus number 1
[17179578.164000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000c000
[17179578.164000] hub 1-0:1.0: USB hub found
[17179578.164000] hub 1-0:1.0: 2 ports detected
[17179578.268000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, 
low) -> IRQ 177
[17179578.268000] PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1
[17179578.268000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[17179578.268000] uhci_hcd 0000:00:10.1: new USB bus registered, 
assigned bus number 2
[17179578.268000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000c400
[17179578.268000] hub 2-0:1.0: USB hub found
[17179578.268000] hub 2-0:1.0: 2 ports detected
[17179578.372000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, 
low) -> IRQ 177
[17179578.372000] PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1
[17179578.372000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[17179578.372000] uhci_hcd 0000:00:10.2: new USB bus registered, 
assigned bus number 3
[17179578.372000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000c800
[17179578.372000] hub 3-0:1.0: USB hub found
[17179578.372000] hub 3-0:1.0: 2 ports detected
[17179578.476000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, 
low) -> IRQ 177
[17179578.476000] PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1
[17179578.476000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[17179578.476000] uhci_hcd 0000:00:10.3: new USB bus registered, 
assigned bus number 4
[17179578.476000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000cc00
[17179578.476000] hub 4-0:1.0: USB hub found
[17179578.476000] hub 4-0:1.0: 2 ports detected
[17179578.508000] usb 1-1: new full speed USB device using uhci_hcd and 
address 2
[17179578.580000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, 
low) -> IRQ 177
[17179578.580000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1
[17179578.580000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[17179578.580000] ehci_hcd 0000:00:10.4: new USB bus registered, 
assigned bus number 5
[17179578.580000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xffeff800
[17179578.580000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, 
driver 10 Dec 2004
[17179578.580000] hub 5-0:1.0: USB hub found
[17179578.580000] hub 5-0:1.0: 8 ports detected
[17179578.740000] Attempting manual resume
[17179578.760000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.776000] kjournald starting.  Commit interval 5 seconds
[17179579.036000] usb 1-1: device not accepting address 2, error -71
[17179580.596000] usb 1-1: new full speed USB device using uhci_hcd and 
address 4
[17179580.736000] hub 1-1:1.0: USB hub found
[17179580.740000] hub 1-1:1.0: 3 ports detected
[17179581.088000] usb 1-2: new full speed USB device using uhci_hcd and 
address 5
[17179581.436000] usb 1-1.1: new full speed USB device using uhci_hcd 
and address 6
[17179586.992000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179587.000000] shpchp: Standard Hot Plug PCI Controller Driver 
version: 0.4
[17179587.012000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, 
low) -> IRQ 185
[17179587.012000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
[17179587.480000] input: PC Speaker as /class/input/input0
[17179587.716000] Linux agpgart interface v0.101 (c) Dave Jones
[17179587.728000] agpgart: Detected VIA PT880 chipset
[17179587.732000] agpgart: AGP aperture is 64M @ 0xf8000000
[17179587.788000] Real Time Clock Driver v1.12
[17179587.876000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by 
Donald Becker
[17179587.876000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, 
low) -> IRQ 193
[17179587.876000] PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 1
[17179587.876000] eth0: VIA Rhine II at 0x1d400, 00:13:8f:27:b4:71, IRQ 193.
[17179587.876000] eth0: MII PHY found at address 1, status 0x786d 
advertising 05e1 Link 45e1.
[17179587.920000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, 
low) -> IRQ 201
[17179587.920000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9
[17179587.920000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[17179588.032000] Floppy drive(s): fd0 is 1.44M
[17179588.048000] parport: PnPBIOS parport detected.
[17179588.048000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[17179588.052000] FDC 0 is a post-1991 82077
[17179588.348000] usbcore: registered new driver hiddev
[17179588.352000] input: Mitsumi Electric Apple Extended USB Keyboard as 
/class/input/input1
[17179588.352000] input: USB HID v1.10 Keyboard [Mitsumi Electric Apple 
Extended USB Keyboard] on usb-0000:00:10.0-1.1
[17179588.360000] input: Mitsumi Electric Apple Extended USB Keyboard as 
/class/input/input2
[17179588.360000] input: USB HID v1.10 Device [Mitsumi Electric Apple 
Extended USB Keyboard] on usb-0000:00:10.0-1.1
[17179588.360000] usbcore: registered new driver usbhid
[17179588.360000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179588.412000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17179588.460000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional 
printer dev 5 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[17179588.460000] usbcore: registered new driver usblp
[17179588.460000] drivers/usb/class/usblp.c: v0.13: USB Printer Device 
Class driver
[17179588.488000] input: ImExPS/2 Logitech Wheel Mouse as 
/class/input/input3
[17179588.580000] ts: Compaq touchscreen protocol output
[17179589.128000] lp0: using parport0 (interrupt-driven).
[17179589.160000] ieee1394: Initialized config rom entry `ip1394'
[17179589.164000] sbp2: $Rev: 1306 $ Ben Collins <bcollins at debian.org>
[17179589.164000] ieee1394: sbp2: Driver forced to serialize I/O 
(serialize_io=1)
[17179589.164000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179589.192000] ieee1394: raw1394: /dev/raw1394 device initialized
[17179589.232000] video1394: Installed video1394 module
[17179589.268000] Adding 3028212k swap on /dev/hda5.  Priority:-1 
extents:1 across:3028212k
[17179589.416000] EXT3 FS on hda1, internal journal
[17179589.508000] NET: Registered protocol family 17
[17179589.608000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179589.608000] md: bitmap version 4.39
[17179590.532000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: 
dm-devel at redhat.com
[17179591.192000] cdrom: open failed.
[17179593.828000] NET: Registered protocol family 10
[17179593.828000] lo: Disabled Privacy Extensions
[17179593.828000] IPv6 over IPv4 tunneling driver
[17179604.808000] eth0: no IPv6 routers present
[17179833.644000] kjournald starting.  Commit interval 5 seconds
[17179833.644000] EXT3 FS on hdb1, internal journal
[17179833.644000] EXT3-fs: mounted filesystem with ordered data mode.
[17179839.664000] ACPI: Power Button (FF) [PWRF]
[17179839.664000] ACPI: Power Button (CM) [PWRB]
[17179839.748000] ibm_acpi: ec object not found
[17179839.776000] pcc_acpi: loading...
[17179842.156000] [drm] Initialized drm 1.0.1 20051102
[17179842.160000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, 
low) -> IRQ 185
[17179842.160000] [drm] Initialized radeon 1.24.0 20060225 on minor 0
[17179842.720000] ppdev: user-space parallel port driver
[17179842.940000] apm: BIOS not found.
[17179843.252000] agpgart: Found an AGP 3.5 compliant device at 
0000:00:00.0.
[17179843.252000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x 
mode
[17179843.252000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x 
mode
[17179843.596000] [drm] Setting GART location based on new memory map
[17179843.596000] [drm] Loading R200 Microcode
[17179843.596000] [drm] writeback test succeeded in 1 usecs
[17179845.996000] Bluetooth: Core ver 2.8
[17179845.996000] NET: Registered protocol family 31
[17179845.996000] Bluetooth: HCI device and connection manager initialized
[17179845.996000] Bluetooth: HCI socket layer initialized
[17179846.052000] Bluetooth: L2CAP ver 2.8
[17179846.052000] Bluetooth: L2CAP socket layer initialized
[17179846.080000] Bluetooth: RFCOMM socket layer initialized
[17179846.080000] Bluetooth: RFCOMM TTY layer initialized
[17179846.080000] Bluetooth: RFCOMM ver 1.7
[17179994.420000] usb 1-1.3: new full speed USB device using uhci_hcd 
and address 7
[17179994.516000] usb 1-1.3: not running at top speed; connect to a high 
speed hub
[17179994.620000] Initializing USB Mass Storage driver...
[17179994.620000] scsi2 : SCSI emulation for USB Mass Storage devices
[17179994.620000] usb-storage: device found at 7
[17179994.620000] usb-storage: waiting for device to settle before scanning
[17179994.620000] usbcore: registered new driver usb-storage
[17179994.620000] USB Mass Storage support registered.
[17179999.652000]   Vendor: SanDisk   Model: Cruzer Mini       Rev: 0.2
[17179999.652000]   Type:   Direct-Access                      ANSI SCSI 
revision: 02
[17179999.664000] usb-storage: device scan complete
[17179999.692000] Driver 'sd' needs updating - please use bus_type methods
[17179999.696000] SCSI device sda: 501759 512-byte hdwr sectors (257 MB)
[17179999.700000] sda: Write Protect is off
[17179999.700000] sda: Mode Sense: 03 00 00 00
[17179999.700000] sda: assuming drive cache: write through
[17179999.712000] SCSI device sda: 501759 512-byte hdwr sectors (257 MB)
[17179999.720000] sda: Write Protect is off
[17179999.720000] sda: Mode Sense: 03 00 00 00
[17179999.720000] sda: assuming drive cache: write through
[17179999.720000]  sda: sda1
[17179999.728000] sd 2:0:0:0: Attached scsi removable disk sda
[17179999.736000] sd 2:0:0:0: Attached scsi generic sg0 type 0
[17180000.352000] FAT: utf8 is not a recommended IO charset for FAT 
filesystems, filesystem will be case sensitive!
[17180227.432000] usb 1-1.3: USB disconnect, address 7