[Linux-bruxelles] video sous la console

Aldo blinuxman at tuxfamily.org
Mer 11 Jan 21:53:27 CET 2006


Bonsoir,

en faisant un boulot pour une voisine, j'ai constaté à ma grande 
stupéfaction qu'un clip.wmv lancé par mplayer en étant root, fonctionne; 
alors que la même commande en user ne veut pas bouger.

J'ai ajouté olr au groupe video, mais aucun effet,
et j'ai pourtant l'impression qu'il s'agit d'un bête pb de permissions.

J'ai mis deux typescripts et ma conf libsvga en pj (notez que la lib 
svga a été installé suite à l'installe de zgv).

Toute piste est la bienvenue.

Aldo.

-------------- section suivante --------------
Script started on Wed 11 Jan 2006 09:21:11 PM CET
starfish4:/home/olr/fun# mplayer Stash-Sadness.wmv 

MPlayer dev-CVS--3.3.5 (C) 2000-2005 MPlayer Team

CPU: Intel Pentium 4/Celeron 4 Northwood; Pentium 4 EE/Xeon Prestonia,Gallatin (Family: 15, Stepping: 9)

Detected cache-line size is 64 bytes

MMX2 supported but disabled

SSE2 supported but disabled

CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0

Compiled for x86 CPU with extensions: MMX SSE







This codecs.conf is too old and incompatible with this MPlayer release! at
line 6

Failed to open /dev/rtc: Device or resource busy (it should be readable by the
user.)

Opening joystick device /dev/input/js0

Can't open joystick device /dev/input/js0 : No such device

Can't init input joystick

Setting up LIRC support...

mplayer: could not connect to socket

mplayer: No such file or directory

Failed to open LIRC support.

You will not be able to use your remote control.

Playing Stash-Sadness.wmv.


Cache fill:  0.00% (0 bytes)   

ASF file format detected.

VIDEO:  [WMV3]  360x224  24bpp  1000.000 fps    0.0 kbps ( 0.0 kbyte/s)

Clip info:

 name: Sadness

 author: Stash

 copyright: Stash

 comments: 

==========================================================================

Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders

AUDIO: 44100 Hz, 2 ch, s16le, 96.7 kbit/6.85% (ratio: 12091->176400)

Selected audio codec: [ffwmav2] afm: ffmpeg (DivX audio v2 (FFmpeg))

==========================================================================

vo: couldn't open the X11 display ()!

open: No such file or directory

vo_mga: Couldn't open /dev/mga_vid

open: No such file or directory

vo_mga: Couldn't open /dev/mga_vid

tdfxfb: can't open /dev/fb0: No such device

vo: couldn't open the X11 display ()!

vo: couldn't open the X11 display ()!

VO XOverlay need a subdriver

[gl] using extended formats. Use -vo gl:nomanyfmts if playback fails.

vo: couldn't open the X11 display ()!

vo: couldn't open the X11 display ()!

vo: couldn't open the X11 display ()!

SDL: Initializing of SDL failed: No available video device.

LibGGI: No explicit target specified.

LibGGI: Try to use fbdev target (framebuffer console)...

LibGG: unable to open lib: /usr/lib/ggi/display/fbdev.so: cannot open
shared object file: No such file or directory

LibGGI: Try to use svgalib target...

LibGG: unable to open lib: /usr/lib/ggi/display/svgalib.so: cannot open
shared object file: No such file or directory

LibGGI: Try to use AAlib target...

LibGG: unable to open lib: /usr/lib/ggi/display/aa.so: cannot open shared
object file: No such file or directory

[ggi] unable to open 'default' output

Can't open /dev/fb0: No such device

[fbdev2] Can't open /dev/fb0: No such device

[svgalib: allocated virtual console #7]

starfish4:/home/olr/fun# exit
Script done on Wed 11 Jan 2006 09:23:25 PM CET
-------------- section suivante --------------
Script started on Wed 11 Jan 2006 09:37:01 PM CET
olr at starfish4:~/fun$ mplayer Stash-Sadness.wmv 
MPlayer dev-CVS--3.3.5 (C) 2000-2005 MPlayer Team
CPU: Intel Pentium 4/Celeron 4 Northwood; Pentium 4 EE/Xeon Prestonia,Gallatin (Family: 15, Stepping: 9)
Detected cache-line size is 64 bytes
MMX2 supported but disabled
SSE2 supported but disabled
CPUflags:  MMX: 1 MMX2: 0 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 0
Compiled for x86 CPU with extensions: MMX SSE



This codecs.conf is too old and incompatible with this MPlayer release! at line 6
Failed to open /dev/rtc: Device or resource busy (it should be readable by the user.)
Opening joystick device /dev/input/js0
Can't open joystick device /dev/input/js0 : Permission denied
Can't init input joystick
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
Playing Stash-Sadness.wmv.

ASF file format detected.
VIDEO:  [WMV3]  360x224  24bpp  1000.000 fps    0.0 kbps ( 0.0 kbyte/s)
Clip info:
 name: Sadness
 author: Stash
 copyright: Stash
 comments: 
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
AUDIO: 44100 Hz, 2 ch, s16le, 96.7 kbit/6.85% (ratio: 12091->176400)
Selected audio codec: [ffwmav2] afm: ffmpeg (DivX audio v2 (FFmpeg))
==========================================================================
vo: couldn't open the X11 display ()!
open: No such file or directory
vo_mga: Couldn't open /dev/mga_vid
open: No such file or directory
vo_mga: Couldn't open /dev/mga_vid
tdfxfb: can't open /dev/fb0: Permission denied
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
VO XOverlay need a subdriver
[gl] using extended formats. Use -vo gl:nomanyfmts if playback fails.
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
vo: couldn't open the X11 display ()!
SDL: Initializing of SDL failed: No available video device.
LibGGI: No explicit target specified.
LibGGI: Try to use fbdev target (framebuffer console)...
LibGG: unable to open lib: /usr/lib/ggi/display/fbdev.so: cannot open shared object file: No such file or directory
LibGGI: Try to use svgalib target...
LibGG: unable to open lib: /usr/lib/ggi/display/svgalib.so: cannot open shared object file: No such file or directory
LibGGI: Try to use AAlib target...
LibGG: unable to open lib: /usr/lib/ggi/display/aa.so: cannot open shared object file: No such file or directory
[ggi] unable to open 'default' output
Can't open /dev/fb0: Permission denied
[fbdev2] Can't open /dev/fb0: Permission denied
svgalib: Cannot get I/O permissions.
olr at starfish4:~/fun$ exit
exit

Script done on Wed 11 Jan 2006 09:37:15 PM CET
-------------- section suivante --------------
# Configuration file for svgalib. Default location is /etc/vga.
# Other config file locations:	~/.svgalibrc
# 				where SVGALIB_CONFIG_FILE points
# Lines starting with '#' are ignored.

# If you have two vga cards with the same pci vendor id, svgalib will try
# to use the first one, even if the second one is active. In that case,
# use PCIStart to force starting the search for a vga card only at a
# specific bus and device numbers. For example, an AGP card is usually on
# bus 1, while pci is on bus 0, so to use the AGP card, uncomment:

# PCIStart 1 0

# Have a deep look at README.config to see what can do here (especially
# for mach32).

# Mouse type:

# mouse Microsoft	# Microsoft
# mouse MouseSystems	# Mouse Systems
# mouse MMSeries	# Logitech MM Series
# mouse Logitech	# Logitech protocol (old, newer mice use Microsoft protocol)
# mouse Busmouse	# Bus mouse
# mouse PS2		# PS/2 mouse
# mouse MouseMan	# Logitech MouseMan
# mouse Spaceball	# Spacetec Spaceball
# mouse IntelliMouse	# Microsoft IntelliMouse or Logitech MouseMan+ on serial port
# mouse IMPS2		# Microsoft IntelliMouse or Logitech MouseMan+ on PS/2 port
# mouse pnp		# plug'n'pray
# mouse WacomGraphire   # Wacom Graphire tablet/mouse
# mouse DRMOUSE4DS	# Digital Research double-wheeled mouse
mouse none		# None

#mouse unconfigured

# (DEBIAN NOTE: the mouse used to default to microsoft, but this was changed
#  to fix bug #13458. If your mouse used to work fine, you can simply change
#  it back to read "microsoft" again. If you are careful to change *only that
#  one word*, and not to add or remove extra whitespace, the package
#  installation will continue to update this file without requiring user
#  intervention because of a modified config file.
#  This applies to all mouse types, not just microsoft.)

# Mouse/keyboard customisation by 101 (Attila Lendvai). If you have any good
# ideas you can reach me at 101 at kempelen.inf.bme.hu

# mouse_accel_type	normal	# No acceleration while delta is less then
				# threshold but delta is multiplied by
				# mouse_accel_mult if more. Originally done by
				# Mike Chapman mike at paranoia.com

#mouse_accel_type	power	# The acceleration factor is a power function
				# of delta until it reaches m_accel_mult. It
				# starts from the coordinate 
				# [1, 1 + m_accel_offset] and goes to
				# [m_accel_thresh, m_accel_mult]. If delta
				# is bigger then m_accel_thresh it is a plain
				# constant (m_accel_mult). It is the f(delta)
				# function with which the delta itself will be
				# multiplied. m_accel_offset is 1 by default,
				# so for delta = 1 the accelerated delta will
				# remain 1 (You don't lose resolution). The
				# starting point of the f(delta) function
				# might be moved along the Y axis up/down with
				# m_accel_offset thus defining the initial
				# minimum acceleration (for delta = 1).
				# Basically it's like the normal mode but the
				# acceleration factor grows as you move your
				# mouse faster and faster, not just turns in
				# and out. Threshold is the point from where
				# the f(delta) function gets linear.
				# This is the one I use for *uaking... =)

# mouse_accel_type	off	# No comment...


#mouse_accel_mult	60	# This is the number with which delta will
				# be multiplied. Basically it's the number
				# that defines how big the acceleration will
				# be

#mouse_accel_thresh	4	# This is the threshold. See description by
				# power

#mouse_accel_power	0.8	# This is the second parameter of the power
				# function used in power mode. Used only by
				# the power mode

#mouse_accel_offset	30	# This is the offset of the starting point
				# on the Y axis. With this you can define the
				# number that will multiply delta = 1 so it's
				# the initial acceleration.

# mouse_accel_maxdelta	600	# This is an upper limit for delta after
				# the acceleration was applied

# mouse_maxdelta	30	# This is an upper limit for the delta
				# before the acceleration. With this one you
				# can limit the biggest valid delta that
				# comes from the mouse.

# mouse_force			# Force parameters even if they seem strange
				# By default svgalib prints an error if any
				# of the numbers are somhow out of the
				# reasonable limit, (Like a negative mult :)
				# and uses the default that's in vgamouse.h

# Usually /dev/mouse will be a link to the mouse device.
# However, esp. with the Spacetec Spaceball you may
# want to specify a different device for svgalib to use

# mdev /dev/ttyS0 # mouse is at /dev/ttyS0

# Some multiprotocol mice will need one of the following:

# setRTS   # set the RTS wire.
# clearRTS # clear the RTS wire.
# leaveRTS # leave the RTS wire alone (default) (Wire is usually set)
# setDTR   # set the DTR wire.
# clearDTR # clear the DTR wire.
# leaveDTR # leave the DTR wire alone (default) (Wire is usually set)

# On mice such as the Microsoft IntelliMouse and Logitech MouseMan+, turning
# the wheel rotates the mouse around the X axis. mouse_wheel_steps controls
# how many steps make up a full 360-degree turn and thus how much rotation
# occurs with each step. The default is 18 steps (20 degrees per step), the
# real-world value for the IntelliMouse. Adjust it to match your mouse or to
# suit your preferences; a negative number reverses the direction and zero
# disables rotation.

#mouse_wheel_steps 18		# For MS IntelliMouse (default)
# mouse_wheel_steps 24		# For Logitech FirstMouse+
# mouse_wheel_steps -18		# Reverses direction
# mouse_wheel_steps 0		# Disables rotation

# mouse_fake_kbd_event sends a fake keyboard event to the program when the
# wheel on a Microsoft IntelliMouse, Logitech MouseMan+, or similar wheel
# mouse is turned. This can be useful for programs that do not recognize the
# Z axis, but only works with some programs that use raw keyboard.
# The format is:
#
#   mouse_fake_kbd_event upscancode downscancode
#
# The up and down scancodes are the scancodes of the keys to simulate when
# the wheel is turned up and down, respectively.
#
# Scancodes can be specified numerically or symbolically; the symbolic names
# are determined by the keymap (see below), if no keymap is loaded the default
# is the standard US QWERTY keyboard with the following names available:
# letters (a-z), numbers (zero-nine), function keys (F1-F12), the keypad
# numbers (KP_0-KP_9) and other keys (KP_Multiply, KP_Subtract, KP_Add,
# KP_Period, KP_Enter, and KP_Divide), and the following - minus, equal,
# Delete, Tab, bracketleft, bracketright, Return, Control, semicolon,
# apostrophe, grave, Shift, backslash, comma, period, slash, Shift, Alt, space,
# Caps_Lock, Num_Lock, Scroll_Lock, Last_Console, less, Control_backslash,
# AltGr, Break, Find, Up, Prior, Left, Right, Select, Down, Next, Insert,
# and Remove.
#
# Note that this option has no effect unless the IntelliMouse or IMPS2 mouse
# type is used (see above). Also note that the simulated keypresses are
# instantaneous, so they cannot be used for functions that require a key to
# be held down for a certain length of time.

#  This example simulates a press of the left bracket ([) when the wheel is
#  turned up and a press of the right bracket (]) when the wheel is turned
#  down (good for selecting items in Quake II):
# mouse_fake_kbd_event bracketleft bracketright

# Keyboard config:

# kbd_keymap allows you to use an alternate keyboard layout with programs that
# use raw keyboard support by translating scancodes from the desired layout to
# their equivalents in the layout expected by the program. This option has no
# affect on programs that do not use raw keyboard.
#
# Keymap files to convert between any two arbitrary keyboard layouts can be
# generated with the svgakeymap utility, but there are limitations to the
# translations that can be performed. Read the file README.keymap in the
# svgalib documentation directory for more in-depth information.
#
# You must specify the full path to the keymap file; it is recommended that
# keymaps be kept in the same directory as libvga.config, normally /etc/vga.
# The keymap specified in the configuration file can be overriden by setting
# the environment variable SVGALIB_KEYMAP to point to another keymap file;
# this can be useful for setting keymaps on a per-program basis.
#
#  This example will use the provided US-Dvorak to US-QWERTY map to allow a
#  Dvorak keyboard layout to be used with a program that expects a standard US
#  QWERTY keyboard, for instance Quake:
# kbd_keymap /etc/vga/dvorak-us.keymap

# There is a potential security risk in allowing users to remap keyboard
# scancodes at will; with this option enabled only keymap files owned by
# root can be used. Normally you should leave this on, but if you have a
# single-user box or you really trust your users you may find it convenient
# to run without it and allow users to load arbitrary keymaps.

kbd_only_root_keymaps

# kbd_fake_mouse_event, as it says, sends a fake mouse event to the program.
# The format is: kbd_fake_mouse_event scancode [flag(s)] command [argument]
#   Scancode is a raw scancode or a descriptive name, the same as with fake
#   keyboard events (see above). If you use keymap conversion, specify
#   scancodes for the keyboard layout the program will receive.
#   Flags:   down   - trigger event when the key is pressed (default)
#	     up     - the opposite
#	     both   - trigger in both case, if pressed/released
#	     repeat - repeat events if the key is kept pressed (off by default)
#   commands: delta[xyz]  - send a fake delta event as if you have moved your
#	 		    mouse. If the parameter is 'off' / 'on' it will turn
#			    off/on the respective mouse axis (requires a
#			    parameter, of course)
#	      button[123] - send a fake event that the mouse button is pressed
#			    or released that's given by the parameter.
# 			    ('pressed' or 'released')
# Here are some examples:

#  This is one I use in *uake: it turns around, looks down a bit and when the
#  key is released it does the opposite, so it gets back to the starting state.
#  With this one and the help of a rocket you can fly though the whole map :)
#  (Scancode 28 is enter)
# kbd_fake_mouse_event 28 both deltax 8182 down deltay -1500 up deltay 1500

#  This one will switch off the y axis of the mouse while the key (right ctrl)
#  is kept pressed.
# kbd_fake_mouse_event 97 down deltay off  up deltay on

#  This one is the same as if you were pressing the left mouse button. (But
#  if you move your mouse then the button state will reset even if you keep
#  right ctrl down...)
# kbd_fake_mouse_event 97 down button1 pressed up button1 released

# Monitor type:

# Only one range can be specified for the moment.  Format:
# HorizSync min_kHz max_kHz
# VertRefresh min_Hz max_Hz

# Typical Horizontal sync ranges
# (Consult your monitor manual for Vertical sync ranges)
#
# 31.5 - 31.5 kHz (Standard VGA monitor, 640x480 @ 60 Hz)
# 31.5 - 35.1 kHz (Old SVGA monitor, 800x600 @ 56 Hz)
# 31.5 - 35.5 kHz (Low-end SVGA, 8514, 1024x768 @ 43 Hz interlaced)
# 31.5 - 37.9 kHz (SVGA monitor, 800x600 @ 60 Hz, 640x480 @ 72 Hz)
# 31.5 - 48.3 kHz (SVGA non-interlaced, 800x600 @ 72 Hz, 1024x768 @ 60 Hz)
# 31.5 - 56.0 kHz (high frequency, 1024x768 @ 70 Hz)
# 31.5 - ???? kHz (1024x768 @ 72 Hz)
# 31.5 - 64.3 kHz (1280x1024 @ 60 Hz)

#HorizSync 31.5 35.5
HorizSync 31.0 60.0
#VertRefresh 50 90
VertRefresh 56 75

# If you have a NeoMagic card on a Toshiba Libretto 100, 110 use that instead

# HorizSync 31.5 70
# VertRefresh 50 100
# Modeline "800x480"   50  800  856  976 1024   480  483  490  504 +hsync +vsync
# newmode  800 480 256       800 1
# newmode  800 480 32768    1600 2
# newmode  800 480 65536    1600 2
# newmode  800 480 16777216 2400 3

# Monitor timings
#
# These are prefered over the default timings (if monitor and chipset
# can handle them). Not all drivers use them at the moment, and Mach32
# has its own syntax (see below).
# The format is identical to the one used by XFree86, but the label
# following the modeline keyword is ignored by svgalib.
#
# Here some examples:

# modeline "640x480 at 100"  43  640  664  780  848   480  483  490  504
# modeline "800x600 at 73"   50  800  856  976 1024   600  637  643  666
# modeline "1024x768 at 75"  85 1024 1048 1376 1400   768  771  780  806

# It seems there is a need for a 512x384 mode, this timing was donated
# by Simon Hosie <gumboot at clear.net.nz>: (it is 39kHz horz by 79Hz vert)

# Modeline "512x384 at 79"     25.175 512  522  598  646   384  428  436  494

# Here's a 400x300 Modeline (created by svidtune). Note that for
# doublescan modes, the Vertical values are half the real one (so XFree86
# modelines can be used). 

# Modeline "400x300 at 72" 25.000 400 440 504 520 300 319 322 333 doublescan

# Here is a mode for a ZX Spectrum emulator:
# Modeline "256x192 at 73" 12.588 256 269 312 360 192 208 212 240 doublescan
# newmode 256 192 256 256 1

# the width must be divisible by 8. Some cards require even divisiblity by
# 16, so that's preferable, since there are no standard modes where the
# width is not divisible by 16.

# The following modes are defined in svgalib, but have no timings in
# timing.c, so you'll have to add a modeline in order to use them:
# 1280x720, 1360x768, 1800x1012, 1920x1080, 1920x1440, 2048x1152
# and 2048x1536   

# Mach32 timings:

# e.g. Setup a 320x200 mode for the mach32:

#define 320x200x32K 320x200x64K 320x200x16M 320x200x16M32
#                     16 320 392 464 552 200 245 265 310

# These are REQUIRED for above mode, please edit to suit your monitor.
# (No, I won't pay for a new one)
# HorizSync 29 65
# VertRefresh 42 93.5

# Chipset type:
#
# Use one of the following force chipset type.
# Autodetects if no chipset is specified.
#
# If you have a PCI or AGP card, don't use chipset type forcing.
# If the card is not autodetected, its a bug, and it will probably
# not work even with forcing. Try running vgatest (with no chipset 
# line), and send to me (matan at svgalib.org) the output, a copy of
# /proc/pci (or lspci -n -vv) and whatever info you have on the card. 
#
# If a chipset driver gives trouble, try forcing VGA.

#chipset VGA		# Standard VGA
# chipset EGA		# EGA
# chipset ET3000	# Tseng ET3000
# chipset ET4000	# Tseng ET4000
# chipset Cirrus	# Cirrus Logic GD542x
# chipset TVGA		# Trident TVGA8900/9000
# chipset Oak		# Oak Technologies 037/067/077
# chipset S3		# S3 chipsets
# chipset GVGA6400	# Genoa 6400
# chipset ARK		# ARK Logic
chipset ATI		# old ATI VGA
# chipset Mach32	# ATI Mach32
# chipset ALI		# ALI2301
# chipset Mach64	# ATI Mach64 - deprecated
# chipset ET6000        # Tseng ET6000
# chipset APM	 	# Alliance Technology AT 24/25/3D
# chipset NV3		# nVidia Riva 128 / TNT / GeForce
#chipset VESA          # nicely behaved Vesa Bioses
# chipset MX		# MX86251 (some Voodoo Rush boards)
# chipset PARADISE 	# WD90C31
# chipset RAGE		# RagePro (and might work with some older mach64)
# chipset BANSHEE	# Banshee/V3.
# chipset SIS		# SiS 5597/6326/620/530 cards / integrated vga.
# chipset I740		# Intel i740 based cards.
# chipset NEOMAGIC
# chipset LAGUNA	# Cirrus Logic Laguna series (546X)
# chipset FBDEV		# Use kernel fbdev, instead of direct hardware.
# chipset G400		# Matrox Mystique/G100/G200/G400/G450
# chipset R128		# Ati Rage128
# chipset SAVAGE	# S3 chipsets Savage
# chipset C&T		# Chips and Technologies

# EGA Color/mono mode:
# Required if chipset is EGA.
#
# Use one of the following digits to force color/mono:

# monotext  # Card is in monochrome emulation mode
# colortext # Card is in color emulation mode
colortext

# RAMDAC support:
# Some chipsets (e.g. S3 and ARK) allows specifying a RAMDAC type.
# If your RAMDAC is not autodetected, you can try specifying it.
# Do NOT specify a RAMDAC if you card uses the S3 Trio chipset
# (the RAMDAC is built in).

# Ramdac Sierra32K
# Ramdac SC15025
# Ramdac SDAC         # S3 SDAC
# Ramdac GenDAC       # S3 GenDAC
# Ramdac ATT20C490    # AT&T 20C490, 491, 492 (and compatibles)
# Ramdac ATT20C498    # AT&T 20C498
# Ramdac IBMRGB52x    # IBM RGB524, 526, 528 (and compatibles)

# Dotclocks:
# Some chipsets needs a list of dot clocks for optimum operation.  Some
# includes or supports a programmable clock chip.  You'll need to specify
# them here.

# Fixed clocks example:
# (The following is just an example, get the values for your card from
#  you XF86Config)

# Clocks 25.175 28.3 40 70 50 75 36 44.9 0 118 77 31.5 110 65 72 93.5

# Programmable clockchip example:

# Clockchip ICD2061A  # The only one supported right now



# Here are miscellaneous options to help with specific problems.

# VesaText	      # Helps the VESA driver with text mode restoration
		      # problems.

VesaSave 14	      # changing value might help text mode restoring
		      # problems with VESA driver. Legal values: 0-15

# NoVCControl	      # Disables svgalib's finding a new VC if run
		      # from X. Good fo using dumpreg under X, but
		      # probably bad for standard usage.


# RageDoubleClock     # If your card is based on ATI's rage card, and
		      # the pixel clock is double what it should be 
		      # (main symptom is some modes are out of sync),
		      # try enabling this. If it helps, please report to
		      # me (matan at svgalib.org) 

# NeoMagicLibretto100
		      # Enable if you have a NeoMagic card on a Toshiba
		      # Libretto 100, 110, etc



Plus d'informations sur la liste de diffusion Linux-bruxelles