[Linux-bruxelles] voice over ip

[Alain BarBason]

>>D'une recherche sur internet, je pense que ca vient d'un problème 
>>initialisation de la carte son.
>>J'ai lancé xmms pour voir, et je dois utiliser eSound et non alsa ou oss
>>
>>Est-ce que cela vous dit qqchose ?
> 
> 
> Essaie la commande  "esdctl off" pour désactiver temporairement esound
> puis réessaie.

Elle n'existe pas chez moi. J'ai donc "kill"é  "esd", et en effet je 
vais plus loin.

Xmms en oss fonctionne
kiax s'ouvre mais me donne (voir plus bas)

ca dit qqchose ??

> alain at P2-7:~$ kiax
> sam aoû 20 18:35:43 2005 Using IAXClient ver. CVS-2005/04/14-16:33
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> sam aoû 20 18:35:43 2005 IaxWrapper::iaxc_initialize() result = 0
> sam aoû 20 18:35:43 2005 IaxWrapper::start_iax_client() starting processing thread..
> sam aoû 20 18:35:43 2005 IaxWrapper::iaxc_start_processing_thread() result = 0
> sam aoû 20 18:35:43 2005 IaxWrapper::registerMultipleAccounts() registering accounts..
> sam aoû 20 18:35:43 2005 IaxWrapper::registerMultipleAccounts() register alainbb [alainbb:xxx at iax.voipbuster.com]
> sam aoû 20 18:35:46 2005 IaxWrapper::event_text() Message: Type=1 Message=Registration rejected

Il y a le problème du son, et du compte.
Pour ce dernier je vois : "alainbb:xxx at iax.voipbuster.com" est-ce qu'il 
faut spécifier un port ?

Pour le premier, si j'essaie quand même un coup de téléphone (malgre le 
"Registration rejected") cela donne

> sam aoû 20 18:43:34 2005 IaxWrapper::configureCall(acc number 0) configuring call..
> sam aoû 20 18:43:34 2005 IaxWrapper::configureCall(acc number 0) account number=0, account alias=alainbb
> sam aoû 20 18:43:34 2005 IaxWrapper::configureCall(acc number 0) callerId=alainbb
> sam aoû 20 18:43:34 2005 IaxWrapper::configureCall(acc number 0) callerIdNumber=12345678
> sam aoû 20 18:43:34 2005 IaxWrapper::configureCall(acc number 0) codec=gsm
> sam aoû 20 18:43:34 2005 IaxWrapper::configureCall(acc number 0) filter flag=27
> sam aoû 20 18:43:34 2005 IaxWrapper::configureCall(acc number 0) silence threshold=-99
> sam aoû 20 18:43:34 2005 IaxWrapper::configureCall(acc number 0) devices in=0, out=0, ring=0
> sam aoû 20 18:43:34 2005 IaxWrapper::dial(int, QString) dialing alainbb:xxx at iax.voipbuster.com/003223758695 ..
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=3 Message=Can't start audio
> sam aoû 20 18:43:34 2005 IaxWrapper::event_state() processing IAX event..
> sam aoû 20 18:43:34 2005 IaxWrapper::event_state() call state 0 : active=1, outgoing=1, ringing=0, complete=0, selected=0
> sam aoû 20 18:43:34 2005 IaxWrapper::event_state() call info 0 : remote=003223758695, remote_name=alainbb:xxx at iax.voipbuster.com/003223758695, local=alainbb, local_context=default
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=3 Message=Can't start audio
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=3 Message=Can't start audio
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=3 Message=Can't start audio
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=3 Message=Can't start audio
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=4 Message=iaxclient audio: Can't open Audio Device, we tried 5 times.  Perhaps you do not have an input or output device?
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=3 Message=Can't start audio
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=4 Message=iaxclient audio: Can't open Audio Device, we tried 5 times.  Perhaps you do not have an input or output device?
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=3 Message=Can't start audio
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=4 Message=iaxclient audio: Can't open Audio Device, we tried 5 times.  Perhaps you do not have an input or output device?
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=3 Message=Can't start audio
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=4 Message=iaxclient audio: Can't open Audio Device, we tried 5 times.  Perhaps you do not have an input or output device?
> sam aoû 20 18:43:34 2005 IaxWrapper::event_text() Message: Type=3 Message=Can't start audio
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate
> PortAudio error at opening separate input stream: Host error.
> Pa_SetupDeviceFormat: HW does not support 2 channels
> Pa_SetupDeviceFormat: warning - requested sample rate = 8000 Hz - closest = 48000
> Pa_SetupDeviceFormat: HW does not support 8000 Hz sample rate

-- 
by AlainBB
http://www.barbason.be