[Linux-bruxelles] gravure CD avec sarge

Carl Devos carl at zongo.be
Mar 13 Avr 22:44:16 CEST 2004


Bonjour,

J'ai un petit problème pour graver une copie d'un CD audio (mais non,
c'est pas illégal, c'est ma fille qui a griffé son CD préféré "lala" et vu
qu'on a un lecteur de salon sensible, ça passe plus).

Déjà pour graver les iso avec cdrecord, j'avais dû rajouter ATAPI: devant
le device SCSI, mais ici avec cdrdao, je m'en sors pas.

(toutes les commandes en root)

Pour copier sur mon disque dur, cette commande passe:

# cdrdao read-cd --device ATAPI:1,0,0 --driver generic-mmc dideldum

quand je veux écrire:

# cdrdao write -v 4 --device ATAPI:1,0,0 --driver generic-mmc dideldum
Cdrdao version 1.1.7 - (C) Andreas Mueller <andreas at daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

Using libscg version 'schily-0.7'
Using libscg transport code version 'schily-scsi-linux-ata.c-1.4'

?: Input/output error.  : scsi sendcmd: no error
CDB:  12 00 00 00 2C 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 20s
ERROR: Inquiry command failed on 'ATAPI:1,0,0'.
ATAPI:1,0,0:    Rev:
Using driver: Generic SCSI-3/MMC - Version 2.0 (options 0x0000)

Starting write ?: Input/output error.  : scsi sendcmd: no error
CDB:  5A 00 2A 00 00 00 00 00 8C 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 20s
ERROR: Cannot retrieve drive capabilities mode page.
at speed 0...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Lead-in start: 97:27:18 length: 11457
Lead-out length: 6750
Swap: 1
Buffer filled
Memory locked
Waiting for reader process
Awaken, will start writing
?: Input/output error.  : scsi sendcmd: no error
CDB:  5A 00 05 00 00 00 00 00 A4 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 180s
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot setup write parameters for session-at-once mode.
ERROR: Please try to use the 'generic-mmc-raw' driver.
ERROR: Writing failed.

Donc, j'essaye avec generic-mmc-raw, mais pas mieux:

# cdrdao write -v 4 --device ATAPI:1,0,0 --driver generic-mmc-raw dideldum
Cdrdao version 1.1.7 - (C) Andreas Mueller <andreas at daneb.de>
  SCSI interface library - (C) Joerg Schilling
  Paranoia DAE library - (C) Monty

Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables.

Using libscg version 'schily-0.7'
Using libscg transport code version 'schily-scsi-linux-ata.c-1.4'

?: Input/output error.  : scsi sendcmd: no error
CDB:  12 00 00 00 2C 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.001s timeout 20s
ERROR: Inquiry command failed on 'ATAPI:1,0,0'.
ATAPI:1,0,0:    Rev:
Using driver: Generic SCSI-3/MMC (raw writing) - Version 2.0 (options 0x0000)

Starting write ?: Input/output error.  : scsi sendcmd: no error
CDB:  5A 00 2A 00 00 00 00 00 8C 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 20s
ERROR: Cannot retrieve drive capabilities mode page.
at speed 0...
Pausing 10 seconds - hit CTRL-C to abort.
Process can be aborted with QUIT signal (usually CTRL-\).
Lead-in start: 97:27:18 length: 11457
Lead-out length: 6750
?: Input/output error.  : scsi sendcmd: no error
CDB:  5A 00 05 00 00 00 00 00 A4 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 20s
ERROR: Cannot retrieve write parameters mode page.
?: Input/output error.  : scsi sendcmd: no error
CDB:  5A 00 05 00 00 00 00 00 A4 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.002s timeout 20s
ERROR: Cannot retrieve write parameters mode page.
?: Input/output error.  : scsi sendcmd: no error
CDB:  5A 00 05 00 00 00 00 00 A4 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.001s timeout 20s
ERROR: Cannot retrieve write parameters mode page.
ERROR: Cannot setup disk-at-once writing for this drive.
ERROR: Writing failed.

Quelques infos qui pourraient être utiles:

# uname -a
Linux excalibur 2.4.25-1-386 #1 Tue Feb 24 08:11:13 EST 2004 i686 GNU/Linux

# cdrecord dev=ATAPI:1,0,0 -checkdrive
Cdrecord-Clone 2.01a26 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of
cdrecord
      and thus may have bugs that are not present in the original version.
      Please send bug reports and support requests to
<cdrtools at packages.debian.org>.
      The original author should not be bothered with problems of this
version.

scsidev: 'ATAPI:1,0,0'
devname: 'ATAPI'
scsibus: 1 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Using libscg version 'schily-0.8'.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'SONY    '
Identifikation : 'CD-RW  CRX175A1 '
Revision       : '5YS2'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R

Distro: GNU/Linux testing (Sarge), rien d'exotique.

Ca marchait sans problème avec woody, je faisais:

# cdrdao write --device 0,1,0 image_cd

Quelqu'un voit ce que ça pourrait être?

Merci,

Carl




Plus d'informations sur la liste de diffusion Linux-bruxelles