[Linux-bruxelles] HELP, ddur déconne, extrait de mon dmesg

[Aldo]

HELP HELP! Ddur déconne, Debian bootable 1 x sur 2 / sur 3...
Extrait de mon dmesg (cf. partition check):
[...]
    ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA
hda: IBM-DHEA-36480, ATA DISK drive
hdb: Maxtor 6Y080L0, ATA DISK drive
hdc: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive
hdd: CD-ROM 56X/AKH, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 12692736 sectors (6499 MB) w/476KiB Cache, CHS=12592/16/63
hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=158816/16/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [790/255/63] p1 p2 < p5 p6 p7 p8 p9 >
 /dev/ide/host0/bus0/target1/lun0: [PTBL] [9964/255/63] p1 p2 p4 < p5 p6 p7 p8 p9 p10 p11 p12 >
ext3: No journal on filesystem on ide0(3,69)
# *** à partir d'ici ça devient foireux ***
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=1673527, sector=1062994
end_request: I/O error, dev 03:45 (hdb), sector 1062994
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=1675197, sector=1064664
end_request: I/O error, dev 03:45 (hdb), sector 1064664
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=1674483, sector=1063950
end_request: I/O error, dev 03:45 (hdb), sector 1063950
Adding Swap: 257032k swap-space (priority -1)
Real Time Clock Driver v1.10e
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=2984973, sector=2374440
end_request: I/O error, dev 03:45 (hdb), sector 2374440
DoubleTalk PC at 29e-29f, ROM version 5.80, serial number 17681, MAJOR 254
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=1667888, sector=1057355
end_request: I/O error, dev 03:45 (hdb), sector 1057355
8139too Fast Ethernet driver 0.9.24
PCI: Found IRQ 10 for device 00:0b.0
eth0: RealTek RTL8139 Fast Ethernet at 0xe088e000, 00:48:54:6f:f1:ec, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8139B'
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: Printer, Canon BJC-4300
lp0: using parport0 (polling).
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=887394, sector=276861
end_request: I/O error, dev 03:45 (hdb), sector 276861
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: PLEXTOR   Model: CD-R   PX-W4012A  Rev: 1.02
  Type:   CD-ROM                             ANSI SCSI revision: 02
  Vendor: E-IDE     Model: CD-ROM 56X/AKH    Rev: A80 
  Type:   CD-ROM                             ANSI SCSI revision: 02
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=1927389, sector=1316856
end_request: I/O error, dev 03:45 (hdb), sector 1316856
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=5231628, sector=524520
end_request: I/O error, dev 03:46 (hdb), sector 524520
EXT2-fs error (device ide0(3,70)): ext2_read_inode: unable to read inode block - inode=33386, block=65565
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=1927373, sector=1316840
end_request: I/O error, dev 03:45 (hdb), sector 1316840
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=2979619, sector=2369086
end_request: I/O error, dev 03:45 (hdb), sector 2369086
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=2979624, sector=2369091
end_request: I/O error, dev 03:45 (hdb), sector 2369091
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=5762372, sector=1055264
end_request: I/O error, dev 03:46 (hdb), sector 1055264
hdb: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hdb: read_intr: error=0x40 { UncorrectableError }, LBAsect=8120514, sector=3413406
end_request: I/O error, dev 03:46 (hdb), sector 3413406
# *** et malgré cela j'arrive au login "starfish login:" ***

Qui sait? / peut m'aider urgement?
Aldo.