[Linux-bruxelles] deux cartes graphiques

[Carl Devos]

On 29 Oct 2002 13:57:59 +0100
"Leblicq Jean-Yves" <manager at azimuth.be> wrote:

> Y a-t'il quéqhchose de particulié à faire ou bien faut bèèètement
> insérer la deuxième carte graphique ?

Si tu utilises X, il faut modifier XF86Config-4 (dans /etc/X11/ sous
Debian). Voici le mien, que j'utilise avec XFree 4.1:

Section "ServerLayout"
  Identifier     "XFree86 Configured"
  Screen      0  "Screen0" 0 0
  Screen      1  "Screen1" RightOf "Screen0"
  InputDevice    "Mouse0" "CorePointer"
  InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
  RgbPath      "/usr/X11R6/lib/X11/rgb"
  ModulePath   "/usr/X11R6/lib/modules"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
  FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
  FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
  Load  "dbe"
  Load  "type1"
  Load  "speedo"
  Load  "dri"
  Load  "extmod"
  Load  "glx"
  Load  "pex5"
  Load  "record"
  Load  "xie"
EndSection

Section "InputDevice"
  Identifier  "Keyboard0"
  Option      "xkbLayout" "be"
  Driver      "keyboard"
EndSection

Section "InputDevice"
  Identifier  "Mouse0"
  Driver      "mouse"
  Option      "Protocol" "ExplorerPS/2"
  Option      "Device" "/dev/psaux"
  Option      "Buttons" "5"
  Option      "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
  Identifier   "Monitor0"
  VendorName   "LTN"
  ModelName    "B1996NST(99)"
  HorizSync    30.0 - 95.0
  VertRefresh  50.0 - 160.0
EndSection

Section "Monitor"
  Identifier   "Monitor1"
  VendorName   "LTN"
  ModelName    "B1997PNST/NST"
  HorizSync    30.0 - 95.0
  VertRefresh  50.0 - 150.0
EndSection

Section "Device"
  Identifier  "Card0"
  Driver      "nv"
  VendorName  "NVidia"
  BoardName   "Riva Vanta"
  BusID       "PCI:1:0:0"
EndSection

Section "Device"
  Identifier  "Card1"
  Driver      "sis"
  VendorName  "SiS"
  BoardName   "6326"
  BusID       "PCI:0:20:0"
EndSection

Section "Screen"
  Identifier "Screen0"
  Device     "Card0"
  Monitor    "Monitor0"
  DefaultDepth     16
  SubSection "Display"
    Depth     1
  EndSubSection
  SubSection "Display"
    Depth     4
  EndSubSection
  SubSection "Display"
    Depth     8
  EndSubSection
  SubSection "Display"
    Depth     15
  EndSubSection
  SubSection "Display"
    Depth     16
    Modes    "1280x960" "1152x864" "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
    Depth     24
  EndSubSection
EndSection

Section "Screen"
  Identifier "Screen1"
  Device     "Card1"
  Monitor    "Monitor1"
  DefaultDepth     16
  SubSection "Display"
    Depth     1
  EndSubSection
  SubSection "Display"
    Depth     4
  EndSubSection
  SubSection "Display"
    Depth     8
  EndSubSection
  SubSection "Display"
    Depth     15
  EndSubSection
  SubSection "Display"
    Depth     16
    Modes    "1280x960" "1152x864" "1024x768" "800x600" "640x480"
  EndSubSection
  SubSection "Display"
    Depth     24
  EndSubSection
EndSection
  
Section "DRI" 
  Group        0
EndSection

Je crois que c'est tout. On a eu du mal avec Window Maker au début
(bugs), mais après quelques temps, ça a tourné. KDE n'a jamais posé de
problème.

	Carl